Post by SandStorm on May 29, 2006 16:41:27 GMT
Needed tools:
x65Flasher v1091 -> [Download]
(the v1094 might go well too) -> [Download]
px75v1 -> Download]
V_Klay - > [Download]
Remember, battery allways charged!!!
Even for L.G. versions starting from FW36 and the new X75 series!!
For this you absolutely need the new x65Flasher v1091 (does not function with older versions)
In the listing of the Flashers you find a file "px75v1"
You, also including contents, copy this file e.g. with s25@once into your mobile phone, into the listing "Data\Java\Jam\Applications". With the S75 and SL75 it must into the listing "Data\Applications".
Now absolutely the power switch at the DCA-510 on "OFF" place!
To everything only you start the x65Flasher, stop the correct Com haven, place those to Baud (with the S75/SL75 at the most on 460800 otherwise error develops), select on "Connect" and press then briefly on the red listener key at the switched off mobile phone. Afterwards a window should open the highest named "Choose Phone", there selects it.
Afterwards the following window opens as their late the codes enter must:
Next you switch on your mobile phone and continue with all x65 and for the C75, CX75, ME75, M75 in such a way:
The whole procedure lasts so approx.. 10 min.
Afterwards on the mobile phone display to be seen as in the pictures the HASH and the ESN indicated. These enter you now into the x65Flasher, with "Description" can their e.g. your mobile phone model register, afterwards you confirm with "OK ONE".
Now the Flasher computes the BOOTP ASS ASS, this usually takes few seconds (depending upon system).
The provided BOOTP ASS ASS file finds it then in the listing /VKlay the Flashers. Copies this then into the file \data\loaders of vklay and it can then the new Loader in vklay select.
Contrary to older versions the boat core is not changed duch the px75v1.
Wars!
Now you start the Flasher (select correct Com haven) and press on "Connect" (mobile phone must be switched off) and press briefly the red listener key.
After you are connected with the mobile phone, you click on "READ Flash" and store the being file to a "noticeable" place;) - as here:
If you are finished with the BackUp, you click on "Disconnect" and close the x65flasher:
With "Backup" receive to it a fbk File, with "READ flash" a bin file.
The bin file has the advantage that directly with spc can work on you these. Otherwise it is however no matter, which selects method it for your Fubu.
For rewinding the Fubus you select "Restore Fullflash or" write flash ".
[info from siemenspower.de]
x65Flasher v1091 -> [Download]
(the v1094 might go well too) -> [Download]
px75v1 -> Download]
V_Klay - > [Download]
Remember, battery allways charged!!!
Even for L.G. versions starting from FW36 and the new X75 series!!
For this you absolutely need the new x65Flasher v1091 (does not function with older versions)
In the listing of the Flashers you find a file "px75v1"
You, also including contents, copy this file e.g. with s25@once into your mobile phone, into the listing "Data\Java\Jam\Applications". With the S75 and SL75 it must into the listing "Data\Applications".
Now absolutely the power switch at the DCA-510 on "OFF" place!
To everything only you start the x65Flasher, stop the correct Com haven, place those to Baud (with the S75/SL75 at the most on 460800 otherwise error develops), select on "Connect" and press then briefly on the red listener key at the switched off mobile phone. Afterwards a window should open the highest named "Choose Phone", there selects it.
Afterwards the following window opens as their late the codes enter must:
Next you switch on your mobile phone and continue with all x65 and for the C75, CX75, ME75, M75 in such a way:
The whole procedure lasts so approx.. 10 min.
Afterwards on the mobile phone display to be seen as in the pictures the HASH and the ESN indicated. These enter you now into the x65Flasher, with "Description" can their e.g. your mobile phone model register, afterwards you confirm with "OK ONE".
Now the Flasher computes the BOOTP ASS ASS, this usually takes few seconds (depending upon system).
The provided BOOTP ASS ASS file finds it then in the listing /VKlay the Flashers. Copies this then into the file \data\loaders of vklay and it can then the new Loader in vklay select.
Contrary to older versions the boat core is not changed duch the px75v1.
Wars!
Now you start the Flasher (select correct Com haven) and press on "Connect" (mobile phone must be switched off) and press briefly the red listener key.
After you are connected with the mobile phone, you click on "READ Flash" and store the being file to a "noticeable" place;) - as here:
If you are finished with the BackUp, you click on "Disconnect" and close the x65flasher:
With "Backup" receive to it a fbk File, with "READ flash" a bin file.
The bin file has the advantage that directly with spc can work on you these. Otherwise it is however no matter, which selects method it for your Fubu.
For rewinding the Fubus you select "Restore Fullflash or" write flash ".
[info from siemenspower.de]