|
Post by grasper on Sept 19, 2006 14:58:36 GMT
Hello My friend need original FuBu for SX1. I can't help him because I will buy SX1 in next week. Sincerely, grasper
|
|
|
Post by SandStorm on Sept 19, 2006 22:45:10 GMT
he can load one SX1 winswup (it needs to be winswup), it will work as fubu, because will remove everything, will clear all patches, etc.
|
|
|
Post by grasper on Sept 20, 2006 7:10:26 GMT
My telefone is recognized by winswup,but it can't write sofrware to my phone :/
|
|
|
Post by SandStorm on Sept 20, 2006 11:36:28 GMT
I supose you are using the DCA540 And you loaded the SWUP drivers when you connected it to the phone, right?
|
|
|
Post by grasper on Sept 20, 2006 12:58:11 GMT
What drivers I must install?
|
|
|
Post by grasper on Sept 20, 2006 13:40:45 GMT
With Freia: COMM_LoadBoots : selected phone family is 12 TTY_OpenCOMPort : opening COM1 COMM_IsBootRunning : bootcode does not seem to be running COMM_LoadBoots : Waiting to power on the phone ... COMM_LoadBoots : phone is powered on COMM_SendBoot : boot file is not accepted
What i must do?
BTW. I installed drivers but nothing ;/
|
|
|
Post by grasper on Sept 20, 2006 13:56:41 GMT
And with Joker EGOLD: Start... Loading ServiceBoot... Sending ServiceBoot Ok. No Ping Mobile! and....: BootKey: 6E75747A6F6973746865626573740000 Sending PapameterBoot: Ok. Loading BootsModel(SX1)... Error: StartBoot answer code 0xFF! (((((((((((((((((((((
|
|
|
Post by grasper on Sept 20, 2006 16:49:08 GMT
And how I can SX1 with TestPoint?
|
|
|
Post by SandStorm on Sept 20, 2006 22:32:17 GMT
|
|
|
Post by grasper on Sept 21, 2006 13:21:55 GMT
When is reaching 20% it is writing "SW-Update not successful" (((((((((((((((((((((
|
|
|
Post by SandStorm on Sept 21, 2006 13:28:17 GMT
I think you are doing all like it is there try another winswup You need one serial non original cable and the dca540
|
|
|
Post by grasper on Sept 21, 2006 13:48:31 GMT
I have but i'm updatingg with COM cable because with original cable i have: "Cannot start Copro mode"
|
|
|
Post by SandStorm on Sept 21, 2006 14:08:24 GMT
the com cable is just to update the egold core the remaining need the dca540 please, try to see if now you can enter the update mode
|
|
|
Post by grasper on Sept 21, 2006 14:12:56 GMT
Firstly I mustupdate egold core
|
|
|
Post by grasper on Sept 21, 2006 14:14:49 GMT
Now is stopping at 82% :/
|
|
Dr!ft3R
Yo! teach me hard!
20%
Posts: 9
|
Post by Dr!ft3R on Sept 21, 2006 14:49:11 GMT
Keep trying
|
|
|
Post by SandStorm on Sept 21, 2006 16:59:55 GMT
83%, well, it should be enough to boot. (and try again, even w\ the standart FW maybe) do you remember how was the battery level before the death of the phone? At least 80%, because every time the phone is plugged and data is transfered, the power will decrease. If you want, you can try to plug the cable on another port
|
|
|
Post by grasper on Sept 21, 2006 17:09:03 GMT
Battery is full :/
|
|