Post by SandStorm on Jun 10, 2007 17:55:32 GMT
On SE devices its also possible to remove the op's logo and\or add your name.
For that, you need one tool called "FAR Manager.
How to remove the operator logo
Use FAR to extract the /tpa/system/layout/layout.xml file. Edit the file to delete the "settings" section under the object "StatusIndication", save, then copy back to /tpa/system/layout.
Exit FAR, start phone, NO OPERATOR LOGO
The XML file looks like this:
<object name="StatusIndication">
<settings>
<sett name="RowHeight" value="0"/>
<sett name="TopOffset" value="0"/>
<sett name="TitleHeight" value="0"/>
<sett name="TitleTopOffset" value="0"/>
<sett name="TitleMode" value="1"/>
<sett name="OverlayStyle" value="0"/>
<sett name="YPos" value="18"/>
<sett name="Height" value="176"/>
</settings>
<attributes count="29">
<attr index="0" value="1"/>
<attr index="1" value="0"/>
<attr index="2" value="1"/>
<attr index="3" value="0"/>
<attr index="4" value="0"/>
<attr index="5" value="1"/>
<!-- Main display text attr -->
<attr index="6" value="FontE_20B"/> <!-- Large font in stby -->
<attr index="7" value="FontE_16B"/> <!-- Small font in stby -->
<attr index="8" value="FontE_16B"/> <!-- Notes font -->
<attr index="9" value="FontE_16B"/> <!-- Time/date font -->
<attr index="10" value="22"/> <!-- Opr y1 -->
<attr index="11" value="44"/> <!-- Opr y2 -->
<attr index="12" value="47"/> <!-- BSID y1 -->
<attr index="13" value="65"/> <!-- BSID y2 -->
<attr index="14" value="47"/> <!-- BSID2 y1 -->
<attr index="15" value="83"/> <!-- BSID2 y2 -->
<attr index="16" value="65"/> <!-- Zone y1 -->
<attr index="17" value="83"/> <!-- Zone y2 -->
<attr index="18" value="83"/> <!-- Zone2 y1 -->
<attr index="19" value="101"/> <!-- Zone2 y2 -->
<attr index="20" value="47"/> <!-- Notes1 y1 -->
<attr index="21" value="65"/> <!-- Notes2 y1 -->
<attr index="22" value="83"/> <!-- Notes3 y1 -->
<attr index="23" value="101"/> <!-- Notes4 y1 -->
<attr index="24" value="4"/> <!-- Notes x1 -->
<attr index="25" value="173"/> <!-- Notes x2 -->
<attr index="26" value="27"/> <!-- Notes bttm-offs -->
<attr index="27" value="25"/> <!-- Time/date bttm-offs -->
<attr index="28" value="11"/> <!-- Nbr texts in stby -->
</attributes>
<attributes count="16">
<attr index="0" value="1"/>
<attr index="1" value="0"/>
<attr index="2" value="1"/>
<attr index="3" value="0"/>
<attr index="4" value="0"/>
<attr index="5" value="1"/>
<!-- 2nd display text attr -->
<attr index="6" value="FontE_20B"/> <!-- Time font 2nd -->
<attr index="7" value="FontE_16B"/> <!-- Operator font 2nd -->
<attr index="8" value="FontE_16B"/> <!-- Date font 2nd -->
<attr index="9" value="6"/> <!-- Nbr texts 2nd -->
<attr index="10" value="24"/> <!-- Text 1: y1 2nd -->
<attr index="11" value="40"/> <!-- Text 1: y2 2nd -->
<attr index="12" value="42"/> <!-- Text 2: y1 2nd -->
<attr index="13" value="56"/> <!-- Text 2: y2 2nd -->
<attr index="14" value="64"/> <!-- Text 3: y1 2nd -->
<attr index="15" value="78"/> <!-- Text 3: y2 2nd -->
</attributes>
</object>
All you need to do, is to remove the data between <object name="StatusIndication"> to </object>
[check the original forum for more info]
--------------------------------------
How to remame the operator logo
It is possible to erase or modifying the operator's logo ( writing a name for example ).
The name modified has to contain the same one number of characters than the operator's original name.
The modification of firmware's file the MAIN to remove or to substitute the operator's logo does not work with all the operators. Many operators send the logo through the GPRS.
In these cases besides to modify the file MAIN, you also have to get into contact with his operator and to deactivate the GPRS. After writing GDFS's file with the program SEMCtool marking options Rebuid SP Area and Remake CRC`s. Writing the modified firmware and finalizing. For this operation it is necessary to have the cable of service. With this method the operator's logo disappears with any operator, but with the inconvenience to be able to not use the GPRS.
This operation is not necessary with all the operators, with some is enough to edit the MAIN file.
[Go here for more information]
For that, you need one tool called "FAR Manager.
How to remove the operator logo
Use FAR to extract the /tpa/system/layout/layout.xml file. Edit the file to delete the "settings" section under the object "StatusIndication", save, then copy back to /tpa/system/layout.
Exit FAR, start phone, NO OPERATOR LOGO
The XML file looks like this:
<object name="StatusIndication">
<settings>
<sett name="RowHeight" value="0"/>
<sett name="TopOffset" value="0"/>
<sett name="TitleHeight" value="0"/>
<sett name="TitleTopOffset" value="0"/>
<sett name="TitleMode" value="1"/>
<sett name="OverlayStyle" value="0"/>
<sett name="YPos" value="18"/>
<sett name="Height" value="176"/>
</settings>
<attributes count="29">
<attr index="0" value="1"/>
<attr index="1" value="0"/>
<attr index="2" value="1"/>
<attr index="3" value="0"/>
<attr index="4" value="0"/>
<attr index="5" value="1"/>
<!-- Main display text attr -->
<attr index="6" value="FontE_20B"/> <!-- Large font in stby -->
<attr index="7" value="FontE_16B"/> <!-- Small font in stby -->
<attr index="8" value="FontE_16B"/> <!-- Notes font -->
<attr index="9" value="FontE_16B"/> <!-- Time/date font -->
<attr index="10" value="22"/> <!-- Opr y1 -->
<attr index="11" value="44"/> <!-- Opr y2 -->
<attr index="12" value="47"/> <!-- BSID y1 -->
<attr index="13" value="65"/> <!-- BSID y2 -->
<attr index="14" value="47"/> <!-- BSID2 y1 -->
<attr index="15" value="83"/> <!-- BSID2 y2 -->
<attr index="16" value="65"/> <!-- Zone y1 -->
<attr index="17" value="83"/> <!-- Zone y2 -->
<attr index="18" value="83"/> <!-- Zone2 y1 -->
<attr index="19" value="101"/> <!-- Zone2 y2 -->
<attr index="20" value="47"/> <!-- Notes1 y1 -->
<attr index="21" value="65"/> <!-- Notes2 y1 -->
<attr index="22" value="83"/> <!-- Notes3 y1 -->
<attr index="23" value="101"/> <!-- Notes4 y1 -->
<attr index="24" value="4"/> <!-- Notes x1 -->
<attr index="25" value="173"/> <!-- Notes x2 -->
<attr index="26" value="27"/> <!-- Notes bttm-offs -->
<attr index="27" value="25"/> <!-- Time/date bttm-offs -->
<attr index="28" value="11"/> <!-- Nbr texts in stby -->
</attributes>
<attributes count="16">
<attr index="0" value="1"/>
<attr index="1" value="0"/>
<attr index="2" value="1"/>
<attr index="3" value="0"/>
<attr index="4" value="0"/>
<attr index="5" value="1"/>
<!-- 2nd display text attr -->
<attr index="6" value="FontE_20B"/> <!-- Time font 2nd -->
<attr index="7" value="FontE_16B"/> <!-- Operator font 2nd -->
<attr index="8" value="FontE_16B"/> <!-- Date font 2nd -->
<attr index="9" value="6"/> <!-- Nbr texts 2nd -->
<attr index="10" value="24"/> <!-- Text 1: y1 2nd -->
<attr index="11" value="40"/> <!-- Text 1: y2 2nd -->
<attr index="12" value="42"/> <!-- Text 2: y1 2nd -->
<attr index="13" value="56"/> <!-- Text 2: y2 2nd -->
<attr index="14" value="64"/> <!-- Text 3: y1 2nd -->
<attr index="15" value="78"/> <!-- Text 3: y2 2nd -->
</attributes>
</object>
All you need to do, is to remove the data between <object name="StatusIndication"> to </object>
[check the original forum for more info]
--------------------------------------
How to remame the operator logo
It is possible to erase or modifying the operator's logo ( writing a name for example ).
The name modified has to contain the same one number of characters than the operator's original name.
The modification of firmware's file the MAIN to remove or to substitute the operator's logo does not work with all the operators. Many operators send the logo through the GPRS.
In these cases besides to modify the file MAIN, you also have to get into contact with his operator and to deactivate the GPRS. After writing GDFS's file with the program SEMCtool marking options Rebuid SP Area and Remake CRC`s. Writing the modified firmware and finalizing. For this operation it is necessary to have the cable of service. With this method the operator's logo disappears with any operator, but with the inconvenience to be able to not use the GPRS.
This operation is not necessary with all the operators, with some is enough to edit the MAIN file.
[Go here for more information]