Post by SandStorm on Aug 12, 2007 19:56:33 GMT
Here a small guidance about firmware update via SEUS
F: How does one get the current firmware version out?
A: over the service menu “*>*<<*<*”
> stands for Joystick right and < logical-proves for Joystick left
Around a mobile phone (W800i, K750i and D705i) to update one uses either a service POINT (one finds a list here in that) or the update service of Sony Ericsson (SEUS). The FR accomplishes the update in vain i.d.R., if an update is necessary…
For broken Handy's the respective Provider must adapt and release the firmware only. Therefore there are always new versions for normal models over SEUS and also in the FR only. Some Provider is faster different slower.
A condition Internet Explorer, JAVA run time, w2k or w-xp
The Java run time Environment gives it from Sun.
Importantly: Firmware only then update if mobile phone the problem has, only in such a way the fun new software makes no sense, because the new firmware has also again new errors. There is quite those the chance that that cannot be done to mobile phone to a failed update attempt not even any longer. Then a BACKUP and the course are necessary for the FR…
The SEUS starting side is to be found here. Selects your models from us clicks on Sony Ericsson actualization service.
In detail one must accomplish the following steps, in exactly this order:
1. Update driver “Sony Ericsson K750/D750/W800 update service USB more driver” procure. One finds this driver here.
2. Now only the USB cable, thus without mobile phone, with which connect PC.
3. Mobile phone switch off. Then “C” - key keep pressed and the USB cable into the telephone put. Now Windows requires the evenly downloaded driver for a USB driver and selects it here.
4. The driver is installed, mobile phone again switches off and of the USB cable separates.
5. Mobile phone now again without “C” switch on and to the USB cable attach.
6. Updates with SE left from above begin.
7. After some “weiter's” the Site informs you that now a software will heruntergelden named “Seus_setupXXX.exe”. This update program is developed further (which is also necessary), therefore there are no direct Downloadlink here. At present the production this Tutorials is the current version the 1.19.
8. Seus_setupXXX.exe implement, the requests for screen follow. The Java applet that the actual Flashen takes over starts from alone.
A popular place at that the update fails is the progress window of the SEUS. There 20 sec. are located to wait and again stick on are in English that one switches mobile phone off, from the USB cables take off, then.
One must keep the c key pressed when attaching. Only then the actual update starts automatically.
Does not do here nevertheless nothing is correctly installed the update driver (step 1).
It occurs very rarely that that is simply not recognized correctly mobile phone by a USB haven. Only solution: Try with another USB card location.
thank you to USP forums
F: How does one get the current firmware version out?
A: over the service menu “*>*<<*<*”
> stands for Joystick right and < logical-proves for Joystick left
Around a mobile phone (W800i, K750i and D705i) to update one uses either a service POINT (one finds a list here in that) or the update service of Sony Ericsson (SEUS). The FR accomplishes the update in vain i.d.R., if an update is necessary…
For broken Handy's the respective Provider must adapt and release the firmware only. Therefore there are always new versions for normal models over SEUS and also in the FR only. Some Provider is faster different slower.
A condition Internet Explorer, JAVA run time, w2k or w-xp
The Java run time Environment gives it from Sun.
Importantly: Firmware only then update if mobile phone the problem has, only in such a way the fun new software makes no sense, because the new firmware has also again new errors. There is quite those the chance that that cannot be done to mobile phone to a failed update attempt not even any longer. Then a BACKUP and the course are necessary for the FR…
The SEUS starting side is to be found here. Selects your models from us clicks on Sony Ericsson actualization service.
In detail one must accomplish the following steps, in exactly this order:
1. Update driver “Sony Ericsson K750/D750/W800 update service USB more driver” procure. One finds this driver here.
2. Now only the USB cable, thus without mobile phone, with which connect PC.
3. Mobile phone switch off. Then “C” - key keep pressed and the USB cable into the telephone put. Now Windows requires the evenly downloaded driver for a USB driver and selects it here.
4. The driver is installed, mobile phone again switches off and of the USB cable separates.
5. Mobile phone now again without “C” switch on and to the USB cable attach.
6. Updates with SE left from above begin.
7. After some “weiter's” the Site informs you that now a software will heruntergelden named “Seus_setupXXX.exe”. This update program is developed further (which is also necessary), therefore there are no direct Downloadlink here. At present the production this Tutorials is the current version the 1.19.
8. Seus_setupXXX.exe implement, the requests for screen follow. The Java applet that the actual Flashen takes over starts from alone.
A popular place at that the update fails is the progress window of the SEUS. There 20 sec. are located to wait and again stick on are in English that one switches mobile phone off, from the USB cables take off, then.
One must keep the c key pressed when attaching. Only then the actual update starts automatically.
Does not do here nevertheless nothing is correctly installed the update driver (step 1).
It occurs very rarely that that is simply not recognized correctly mobile phone by a USB haven. Only solution: Try with another USB card location.
thank you to USP forums