Post by SandStorm on Apr 16, 2006 19:52:41 GMT
The best selection of SX1 tips all for you!
Deleting Reports (Message - Reports)
1-> go to Menu
2-> open Records
3-> use joystick to move right
4-> click on Left Soft Key (Options)
5-> select Clear Records
6-> click on Left Soft Key (Yes)
Formating phone
Turn your cell phone off. Press * & # - hold them and then turn your phone on by pressing phone red buttoon (ON/OFF).
If you can reach stand by mode type *#7370# and then enter your security code, which is by default 12345 (unless you've changed it)
Saving copy of your contacts
1-> Turn your cell phone OFF-> Not necessary
2-> Turn ON your phone holding Shift Key
3-> Go to c:/system/data
4-> Rename data directory (to dato or something else)
5-> Enter c:/system/data and copy contacts.cdb
6-> Copy contacts.cdb to MMC
7-> Rename c:/system/dato to c:/system/data (DO NOT forgett to do this)
Copying contacts to SIM
1-> Go to contacts
2-> Open one of contacts
3-> Select the number
4-> Select Option -> Copy to SIM ph.book
Deleting or changing Operator Logo
There are two ways to do this:
1-> Manual
Go to c:\system\apps\phone\oplogo\ (make directory if necessary) and copy any bitmap file (.bmp) sized 97 x 25 pixels.
File must be named as MCC+MNC operator code.
Reboot your phone
2-> Automatic
Install FExplorer, run it, select bmp file (can be named anyhow), select Options/Set up as operator logo
p.s. If you don't wan't to have any OP logo, just set 1x1.bmp file as OP logo
[FExplorer Download]
[1x1 BMP]
SX1 camera & IrDA
SX1 camera like others el. cameras can see IR light, so you can use this to check if your IR is working.
1-> Activate SX1 camera
2-> Point some IR beam source into SX1 camera (some other mobile or TV remote control)
3-> Now try to press some button on remote control...
Listening FM radio on speaker
-> Once FM radio is started, click audio key on right side of SX1 (key next to camera key).
-> or just go to options/settings/audio/speaker
Changing station
-> While listening to radio, quickly press button on SX1 headphones twice
Useful codes
*#0000# Date and FW version
*#06# IMEI and other useful info
*#7780# Return to factory settings
*#7370# Phone formating
*#330*0000# Reseting Network Barrings
*#0606# SIM lock state
*#2820# Bluetooth address
Quick Trouble Faq
Question:
My phone doesn't boot/turns on. I see the eye screen for a few seconds and then it turns off. It cannot even charge giving me a system error.
1-> Try one of these or even combinations of them:
2-> Turn on the phone without an MMC.
3-> Turn on the phone without the SIM card
4-> Turn on the phone with the shift key pressed(the one on the left of the C key with the upside arrow).
5-> Try to update/reflash the firmware using the latest selfupdate from www.my-siemens.com .
If none of the above works then you have to format your phone memory by pressing the * and # keys while turning it on, as mentioned above. If still nothing happens then you have to sent it to your nearest Siemens Service Center.
Deleting Reports (Message - Reports)
1-> go to Menu
2-> open Records
3-> use joystick to move right
4-> click on Left Soft Key (Options)
5-> select Clear Records
6-> click on Left Soft Key (Yes)
Formating phone
Turn your cell phone off. Press * & # - hold them and then turn your phone on by pressing phone red buttoon (ON/OFF).
If you can reach stand by mode type *#7370# and then enter your security code, which is by default 12345 (unless you've changed it)
Saving copy of your contacts
1-> Turn your cell phone OFF-> Not necessary
2-> Turn ON your phone holding Shift Key
3-> Go to c:/system/data
4-> Rename data directory (to dato or something else)
5-> Enter c:/system/data and copy contacts.cdb
6-> Copy contacts.cdb to MMC
7-> Rename c:/system/dato to c:/system/data (DO NOT forgett to do this)
Copying contacts to SIM
1-> Go to contacts
2-> Open one of contacts
3-> Select the number
4-> Select Option -> Copy to SIM ph.book
Deleting or changing Operator Logo
There are two ways to do this:
1-> Manual
Go to c:\system\apps\phone\oplogo\ (make directory if necessary) and copy any bitmap file (.bmp) sized 97 x 25 pixels.
File must be named as MCC+MNC operator code.
Reboot your phone
2-> Automatic
Install FExplorer, run it, select bmp file (can be named anyhow), select Options/Set up as operator logo
p.s. If you don't wan't to have any OP logo, just set 1x1.bmp file as OP logo
[FExplorer Download]
[1x1 BMP]
SX1 camera & IrDA
SX1 camera like others el. cameras can see IR light, so you can use this to check if your IR is working.
1-> Activate SX1 camera
2-> Point some IR beam source into SX1 camera (some other mobile or TV remote control)
3-> Now try to press some button on remote control...
Listening FM radio on speaker
-> Once FM radio is started, click audio key on right side of SX1 (key next to camera key).
-> or just go to options/settings/audio/speaker
Changing station
-> While listening to radio, quickly press button on SX1 headphones twice
Useful codes
*#0000# Date and FW version
*#06# IMEI and other useful info
*#7780# Return to factory settings
*#7370# Phone formating
*#330*0000# Reseting Network Barrings
*#0606# SIM lock state
*#2820# Bluetooth address
Quick Trouble Faq
Question:
My phone doesn't boot/turns on. I see the eye screen for a few seconds and then it turns off. It cannot even charge giving me a system error.
1-> Try one of these or even combinations of them:
2-> Turn on the phone without an MMC.
3-> Turn on the phone without the SIM card
4-> Turn on the phone with the shift key pressed(the one on the left of the C key with the upside arrow).
5-> Try to update/reflash the firmware using the latest selfupdate from www.my-siemens.com .
If none of the above works then you have to format your phone memory by pressing the * and # keys while turning it on, as mentioned above. If still nothing happens then you have to sent it to your nearest Siemens Service Center.