Post by LazyEye on Aug 12, 2006 17:29:16 GMT
As I was surfing trough the net, searching for something, I came across another forum for mobile phone (not only siemens, but almost everyphone there is). The site is, I think:
forum.gsmhosting.com
There I found out how to change the IMEI of the x65 series (btw, I haven't tried it on my cx70). This is a copy - paste from the original post:
forum.gsmhosting.com/vbb/showthread.php?t=212275
START QUOTE
STEP by STEP of X65 Imei Change by Trixxi3
Preliminar:
- This works on phone versions <36
- After this you can?t upgrade with WSUP/Update, you?ll lose your new imei.
- After this you can?t unlock with any soft, you?ll lose your new imei.
- After this you can change ffs.
Correct way.
1 - Downgrade with any way to <36 version.
2 - Open x65PapuaUtilsV038d_ENG.exe, Press "Service Mode"
3 - Go to "Codes" and press "Auto Open All"
4 - Go to "Flash", mark "Pause" and "New BCore V22"
5 - Press "Do Job" and wait for finish.
6 - Turn Off mobile if not auto off.
7 - Go to "Settings" and press "Service Mode"
8 - Go to "Flash" and mark "Recalculate Keys in Flash" (two more options will be auto mark, all it?s ok)
If any advice of Wrong entry appear return to codes section and fill Skey and Bkey with any numbers.
9 - Press "Do Job" and wait for finish.
10 - Go to "Settings" and press "Service Mode"
11 - Go to "Codes" and press "Auto Open All"
12 - Press "Freia.log" and save file with any name, but remember this name later
13 - Press "x65flasher.ini" and save file in x65flasher dir.
14 - Open x65flasher.exe and Press "Connect"
15 - Change "Leght" to 40000 and Press "Read Flash", save file
16 - Open SSWx65.exe and write your ESN, calculated by Papuas, Inverted in "Phone Id"
EX: In codes section of Papuas you get ESN: A1B2C3D4, then write in "Phone Id" of
SSWx65.exe in this way: D4C3B2A1.
17 - Write new imei in "New phone Imei" and Press "Dissable OTP", select file saved in step 15.
18 - Save file.
19 - Open x65flasher, select Leght to 40000 and Press "Write Flash", select file saved in step 18.
20 - Press OK to Skip Write BCore confirmation.
21 - Open mapper.exe, select log file saved in step 12, write imei of step 17, MUST TO BE THE SAME!
22 - Open x65PapuaUtilsV038d_ENG.exe, Press "Service Mode", Go to "Codes" and press "Enter Skey in Phone"
23 - In right window must see "Telephone in Factory Mode"
24 - Open Siemens EEPROM tool.exe, Press "Init", Press "Load" and select map file saved in step 21, Press "Select All" in left side, Press Right Arrow, Press "Select All" in right side, Press "Save Selected".
25 - Turn OFF your mobile, and turn ON again for confirmation of new Imei.
END QUOTE
And here is the link for the necessary applications needed (they were seperated into 4 .rar archives on the above mentioned site, so I dowloaded them, extracted, zipped them into only one archive and uploaded on rapidshre.de. PLEASE NOTE: the files on rapidshare.de are valid only for 30 days, so I suggest, if you like, download the file asap).
The download link:
rapidshare.de/files/29149406/x65imei.zip.html
Take care.
forum.gsmhosting.com
There I found out how to change the IMEI of the x65 series (btw, I haven't tried it on my cx70). This is a copy - paste from the original post:
forum.gsmhosting.com/vbb/showthread.php?t=212275
START QUOTE
STEP by STEP of X65 Imei Change by Trixxi3
Preliminar:
- This works on phone versions <36
- After this you can?t upgrade with WSUP/Update, you?ll lose your new imei.
- After this you can?t unlock with any soft, you?ll lose your new imei.
- After this you can change ffs.
Correct way.
1 - Downgrade with any way to <36 version.
2 - Open x65PapuaUtilsV038d_ENG.exe, Press "Service Mode"
3 - Go to "Codes" and press "Auto Open All"
4 - Go to "Flash", mark "Pause" and "New BCore V22"
5 - Press "Do Job" and wait for finish.
6 - Turn Off mobile if not auto off.
7 - Go to "Settings" and press "Service Mode"
8 - Go to "Flash" and mark "Recalculate Keys in Flash" (two more options will be auto mark, all it?s ok)
If any advice of Wrong entry appear return to codes section and fill Skey and Bkey with any numbers.
9 - Press "Do Job" and wait for finish.
10 - Go to "Settings" and press "Service Mode"
11 - Go to "Codes" and press "Auto Open All"
12 - Press "Freia.log" and save file with any name, but remember this name later
13 - Press "x65flasher.ini" and save file in x65flasher dir.
14 - Open x65flasher.exe and Press "Connect"
15 - Change "Leght" to 40000 and Press "Read Flash", save file
16 - Open SSWx65.exe and write your ESN, calculated by Papuas, Inverted in "Phone Id"
EX: In codes section of Papuas you get ESN: A1B2C3D4, then write in "Phone Id" of
SSWx65.exe in this way: D4C3B2A1.
17 - Write new imei in "New phone Imei" and Press "Dissable OTP", select file saved in step 15.
18 - Save file.
19 - Open x65flasher, select Leght to 40000 and Press "Write Flash", select file saved in step 18.
20 - Press OK to Skip Write BCore confirmation.
21 - Open mapper.exe, select log file saved in step 12, write imei of step 17, MUST TO BE THE SAME!
22 - Open x65PapuaUtilsV038d_ENG.exe, Press "Service Mode", Go to "Codes" and press "Enter Skey in Phone"
23 - In right window must see "Telephone in Factory Mode"
24 - Open Siemens EEPROM tool.exe, Press "Init", Press "Load" and select map file saved in step 21, Press "Select All" in left side, Press Right Arrow, Press "Select All" in right side, Press "Save Selected".
25 - Turn OFF your mobile, and turn ON again for confirmation of new Imei.
END QUOTE
And here is the link for the necessary applications needed (they were seperated into 4 .rar archives on the above mentioned site, so I dowloaded them, extracted, zipped them into only one archive and uploaded on rapidshre.de. PLEASE NOTE: the files on rapidshare.de are valid only for 30 days, so I suggest, if you like, download the file asap).
The download link:
rapidshare.de/files/29149406/x65imei.zip.html
Take care.