|
Post by SandStorm on Sept 24, 2009 3:14:22 GMT
Removing SX1 Mastercode You've put Mastercode on your SX1 and now you have forgotten which one is it? No worries, follow 8 steps bellow and you'll remove it... What you need: FW 14/15 Winswup - search the Internet (allsiemens.com) Winswup patcher 2.3 Patch file Starter.sxp File Starter_ARM.RSC 1. step Charge your battery to maximum, and start SDS, MPM or any other aplication that will open your E disc (you can even use Card Reader) 2. step Copy Starter_ARM.RSC to E:/System/Programs 3. step Start Winswup 14/15 and then start Winswup patcher 2.3 4. step Click Load and select Starter.sxp 5. step Click Apply patch and when you get All done message click Save 6. step Turn your SX1 in flash mode (press and hold Joystick down while starting SX1) 7. step Go back to Winswup 14/15 and turn off EGold/Core. Only select whole OMAP, and then clic Start. 8. step Your SX1 is unblocked... Taken and adapted from www.siemensmania.com
|
|